Description

1.Description:

 It is a LED clock module.It is a 0.56-inch digital tube WIFI time clock,using 5V Micro USB power supply port.It can automatically adjust the time through the network every day,keeping the time accurate for a long time.

2.Feature:

 1).The clock module has 8-level brightness adjustment.

 2).The clock digital tube supports the automatic brightness function.After it is turned on,it can be automatically adjusted to level 1 brightness after 19:00,and adjusted to the set brightness at 7:00 the next morning.

 3).The LED digital tube supports global time zones,and different time zones can be set.

 4).The LED clock module has a real-time clock chip.

 5).The real-time clock module has a memory battery,and it will run normally when it is powered off.

 6).The clock module supports two input voltage modes:Micro USB and welding.

3.Parameter:

 1).Product Name:LED Clock Module

 2).Input voltage:DC 5V

 3).Digital tube size:0.56 inch

 4).Display color:red/blue/green/white

 5).Input voltage mode:Micro USB/welding

 6).Work Temperature:-25℃~85℃

 7).Work Humidity:5%~95%RH

 8).Size:51*19*14mm

4.Key Operation Instructions:

 1).Set time,time zone,automatic brightness:

  1.1).Press the set key,the hour digit flashes,press the increase key to modify the value.

  1.2).After adjusting the hour value,press the set key,the minute digit flashes,and press the increase key to modify the value.

  1.3).After adjusting the minute value,press the set key,the second digit flashes,and press the increase key to reset the seconds to zero.

  1.4).After adjusting the number of seconds,press the set key to enter the automatic brightness function setting,display AL:x,and press the increase key to change the value.

  1.5).AL:0 is disabled,AL:1 is enabled (when this function is enabled,the clock becomes level 1 brightness after 19:00,and becomes normal brightness at 7:00 the next day).

  1.6).After setting the automatic brightness function,press the set button to enter the time zone function setting,display EE:8,positive numbers indicate east time zone,negative numbers indicate west time zone,press the increase button to modify the value.After setting the time zone,press the Set key to save the setting and exit.(Note that if the clock is connected to WiFi,it will automatically obtain the network time after exiting the settings).

 2).Set normal brightness:

  2.1).In the non-setting state,pressing the increase key will change the display brightness,and the well will display Ld:x,and it will automatically return to the normal display after two seconds.

5.Application:

  1).DIY Clock

  2).Display time

6.Package:

 1).1pc LED Clock Module