Feature:

1. Can accommodate two Bluetooth-compatible compatible earbuds at the same time, quiet and not disturbing the family. 2. Support long-distance signal transmission, no obstacles, transmission distance of 120 meters. Strong signal, stable transmission.

Description: Product name: Bluetooth-compatible adapter Default Specification: Neutral English Bluetooth-compatible version: V5.0 APT-X, HD, low latency Bluetooth-compatible chip: CSR8675 Frequency range 2.402GHz-2.480GHz Wireless distance: RX: 120M, TX: 120M Bluetooth-compatible protocol: A2DP, AVRCP Codec: APTX HD, APTX LOW LATENCY, APTX, SBC Power supply mode: Type-C interface Working temperature: -10℃-55℃ Product net weight: 42g Lithium battery: 450mah Working hours: ≤16 hours Product size: 58x58x18mm Packing size: 120x103x35mm Gross weight: 175g Bluetooth-compatible protocol: A2DP, AVRCP (can be connected with Bluetooth-compatible speakers or headphones that support A2DP protocol to form a wireless audio transmission network, used in TVs, CDs, home theaters and other equipment; can also be connected with mobile phones/computers to play music ) Output: Optical In, Optical Out, AUX In, AUX Out Charging interface: Type-C PD One with two functions (transmitter mode): support (one transmitter is connected to two Bluetooth-compatible speakers or headphones at the same time, and one CODEC is used at the same time) Multi-point connection, one-to-two function (receiver mode): support (connect two mobile phones) supported Bluetooth-compatible headsets, Bluetooth-compatible receivers, Bluetooth-compatible speakers and other device keys 0000 (four 0s) CODECTX: aptXTMHD, aptXTMLow Latency, aptXTM, SBC;   RX: aptXTMHD, aptXTMLow Latency, aptXTM, SBC; Launch mode:  1. Press and hold the power button for 3S 2. Press the M key to switch to TX mode, the Rako-TX200 Bluetooth-compatible adapter to pairing mode, and turn on the Bluetooth-compatible headset or Bluetooth-compatible speaker, and the pairing connection is successful 3. Double-click the A/B button and then turn on the second headset/speaker to the Bluetooth-compatible pairing mode to connect and pair 4. Turn off the power and turn on the automatic reconnection. At this time, after the Rako-TX200 Bluetooth-compatible adapter is paired with 2 devices and connected successfully, it supports synchronous music playback Receive mode: 1. Long press the power button for 3S 2. Press the M key to switch to the RX mode, the Rako Bluetooth-compatible adapter enters the pairing mode, and the mobile phone/computer or Bluetooth-compatible transmitter is turned on and the connection is successful. 3. Double-click the A/B button and then open the second mobile phone/computer to the Bluetooth-compatible pairing mode to connect and pair Packing list: 1 x instructions 1 x Bluetooth-compatible adapter 1 x RCA Audio Cable 1 x charging wire 1 x fiber optic cable 1 x Carton Note: 1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding. 2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.