Description
DC 12V 2CH DAC Module 0-5V 0-10V PWM to Voltage Analog Converter RS485 Modbus RTU Board
Description:
1: Operating Voltage : DC 12 (DC 12-25V), recommended power supply with small ripple2: Operating Current : 12-13MA3: MODBUS RTU Command support 03 06 function code4: CH1(O1) output voltage is 0-5V, maximum output current is 20MA. 1-5V accuracy 1%, <1V there is a ripple of 50HZ/40MV.CH2(O2) output voltage is 0-10V, maximum output current is 20MA. 2-10V accuracy 1%, <2V there is a ripple of 50HZ/80MV.5: The voltage resolution is 0.01V, the output accuracy is 1%; if the error is greater than 1%, it can be calibrated6 :MODBUS commands can be made serial HyperTerminal (serial assistant) OR PLC Enter;7 :Under the MODBUS command mode, it can support up to 247 devices in parallel8 :Size: 45 * 35 * 15mm9 :Weight: 10g
Instruction manual Please ask us after the purchase
Note:This is a low-cost digital-to-analog conversion module based on the PWM+ADC solution. It has the following disadvantages:1 channel 1 (O1) has 1% accuracy at 1-5V, <1V has 50HZ/40MV ripple, channel 2 (O2) has 1% accuracy at 2-10V, and <2V has 50HZ/80MV Ripple.2 channel 1 (O1) minimum output voltage is 0.05V, channel 2 (O2) minimum output voltage is 0.1V3 There is a 10-20MS high pulse at the moment of power-on
Application
4-20MA/0-20MA SensorCurrent and voltage signal transmissionAutomated industry PLCSmart Home,Home Automation ;Identification system;RS485 Remote monitoring;Multimeter voltmeter
Interface introduction
Package inlcuded:
1 x N4DAC02 12-25V 2 Channel PWM DAC RS485 Module
Specification
Betriebstemperatur : N4DAC02
Ableitungs-Energie : N4DAC02
Art : der Regulierungssteller
Standby current : 12-13MA
Operating Voltage : DC 12-25V