Description

DC 12V 6-Channel Wireless Remote Control Switch 4000m Long Distance 315MHz Transmitter + Receiver

Features:

1: Widely used

2: Working environment -40～+80 degrees

3: Working mode: Jog M4/Self-locking T4/Interlock L4/Jog and self-locking coexist

4: The remote control distance is 4000 meters (see the description below for the theoretical value of open space without interference)

5: Simple to use

The receiver is powered by 12V or 24V, and the default is six independent relay signal output (that is, without voltage output), and the output terminals are respectively normally open, normally closed, and common (no voltage) can be used. This switch can generally be applied to the following two occasions.

1.With 12V or 24V voltage output, this kind of equipment only needs to draw a positive wire from the input end to the common end and then share the negative wire of the input to directly control the 12V or 24 device.

2. Directly connect the normally open end and common end of the output end to other voltage circuits to control its on and off! (The recommended control voltage range is: 3V-250V, current range: 0.1A-10A resistive load)

Product name: DC12v six-way remote control switch

Working voltage: DC12V

Working frequency: default 315MHZ

Working mode: Jog M4/self-locking T4/interlocking L4/jogging and self-locking co-storage code matching method, intelligent learning type

Working environment: -40~+80 degrees

Receiving sensitivity ≥-105dBm

Output current inductive: ≤3.5A3 resistive ≤6A

Dimensions: outer shell: 75*55*30mm; inner panel: 69*49*18mm

Remote control product name: 4000 meters 6-key remote control

Working voltage: DC9v (delivery without battery)

Working frequency: default 315MHZ

Chip model 1527 or 2264 (different for different batches)

Encoding type: millions of codes or pad type into a password

Oscillation resistance 4.7 <default)

Modulation method ASK (stable and less interference)

The remote control distance is 4000 meters (see the description below for the theoretical value of open and no interference)

Dimensions: 136*42*25mm

This distance is the theoretical distance without interference. The actual application will reduce the interference due to the use environment. Please estimate according to the marked 10%-30%. The more you penetrate the wall, the closer the distance! The distance issue is not a product quality issue, thank you for your cooperation!

Instructions for use

1. Working method and status description

The receiver has the following 6 working modes can be set, 6-way jog, 6-way self-locking, 6-way interlock, and jog self-locking interlock coexist. <You can change the working mode according to your own needs, see the description below for details )

1. Jog: press the remote control button 1 to learn <function literal translation: press and hold the remote control button to work, release it to stop!>

2. Self-locking: press the remote control key 2 to learn <function literal translation: the receiver is turned on and off on the same button on the remote control, press the remote control button in turn, the first is to open, the second is to close The third time is on, the fourth time is off, and so on!>

3. Interlock: press the remote control key 3 to learn <function literal translation: press the remote control A key to open and B key to close or A key to close and B key to open. If the remote control has multiple buttons, it will learn which button is on, and all other buttons are off!>

4. 1-3 jog, 4-6 self-locking: press the 4th button on the remote control to learn

5. 1-3 jog, 4-6 interlock: press the 5 key of the remote control to learn

6. 1-2 way jog, 3-6 way interlock: press the No. 6 key of the remote control to learn

Two, add or delete the remote control instructions

1. Learning: Press the learning button of the controller, the buzzer will sound; release the learning button and press the remote control button that needs to be learned for 2S; the buzzer will ring for eight times and then stop, indicating that the learning code is successful.

2. The 2262, 2260, 1527 chip equivalent frequency fixed code learning code wireless remote control that can learn more than 20 different address codes;

3. Code clearing: Keep pressing the learning button of the controller, and the buzzer will go from ringing to not beeping, indicating that the code clearing is successful.

Package including:

1*receiver

1*transmitter