Unterbrechungsfreie Netzteil UPS Modul Für Raspberry Pi Pico, Halten Pico Läuft Während Aufladen, monitor Batterie Status Über I2C
Raspberry Pi Pico and Li-ion battery are NOT included.
DESCRIPTION
UPS Module For Raspberry Pi Pico, Uninterruptible Power Supply
Keeps Your Pico Running While Recharging, Monitoring Battery Status Via I2C
SAFETY CAUTIONS
Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they're not properly recharged or used.
Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery.
Do not mix use old batteries with new ones, avoid using batteries of different brands.
When buying Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test.
Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first.
Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.
ThePico-UPS-Ais a dedicatedUPS (Uninterruptible Power Supply)module designed for Raspberry Pi Pico. It incorporates Li-ion battery switching charger with power path management, and voltage/current monitoring chip, allows monitoring the battery operating status via I2C bus.
Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
Incorporates Li-ion battery switching charger with dynamic power path management, more stable power supply
I2C bus communication, monitoring the battery voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard recharging indicator, power indicator, and battery warning indicator to check if the battery is connected correctly
Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
RECHARGE VOLTAGE |
5V |
CONTROL BUS |
I2C |
BATTERY SUPPORT |
14500 Li-ion battery(NOT included) |
DIMENSIONS |
60 × 21mm |
Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico
ETA6003 recharger chip
INA219 voltage/current monitoring chip
S8261 Li-ion battery protection chip
FS8205 Li-ion battery protection MOS
AO3400 reverse-proof MOS
SI2305 counter current preventing MOS
7.Rapsberry Pi Pico header for direct attaching to Raspberry Pi Pico
8.Power switch
9.Activate button activate the protection circuit after replacing battery
10.14500 battery holder
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
PACKAGE CONTENT
Weight:0.014 kg
The 14500 battery is NOT included
Pico-UPS-A x1
Origin : Mainland China
CONTROL BUS : I2C
DIMENSIONS : 60*21mm
Model Number : Pico-UPS-A-EN
RECHARGE VOLTAGE : 5V
Condition : New
BATTERY SUPPORT : 14500 Li-ion battery (NOT included)
Type : 1